 |
 |
 |
|
| The SCA (Single Connector Attachment) interface combines the Data, Power, and SCSI ID connectors into a single 80-pin connector. For these SCA drives to be used in a standard system or subsystem enclosure requires an adapter to convert the 80-pin connector back into separate Data, Power, and SCSI ID connectors. With SCA Adapters from Cables To Go, you can make this conversion with ease. The SCSI-2/SCSI-3 to SCSI-3 adapter is designed to adapt an existing 68-pin or 50-pin ribbon cable to a SCSI-3 SCA80-pin connection. The SCA80 adapter includes an onboard power connection and id jumpers. Connectors: Internal SCSI-3 68-pin Female or Internal SCSI-2 IDC 50-pin Male to Internal SCSI-3 HP 80-pin Female. Use: Convert a 68-pin ribbon cable or a SCSI-2 50-pin connection to a SCSI-3 SCA80-pin connection. On-board termination. |
|
|
|
|
|
|
|
|
