 |
 |
 |
|
The KVM Over IP Switch provides convenient, remote KVM access and control via LAN or Internet. You can control your computer or servers from another country just as easily as you can from your desk! This device combines digital remote KVM access via IP networks with comprehensive and integrated system management.
The KVM Over IP Switch captures, digitizes, and compresses a video signal and transmits it with keyboard and mouse signals to and from a remote computer. This is a non-intrusive solution for remote access and control. Remote access and control software runs on embedded processors only, not on mission-critical servers, so that there is no interference with server operation or impact on network performance.
This switch supports consoles consisting of PS/2 style keyboards and mice and HDDB 15 video output. This switch will automatically detect the current video mode of the console, however manual fine-tuning is recommended to receive the best video quality. Video streams up to 110 MHz dot clock are accepted. This results in a screen resolution of 1280x1024 pixels with a frame rate of 60 Hz.
PC Port Connectors (All Female Types):- PS/2 Keyboard Mini Din 6 pin
- PS/2 Mouse Mini Din 6 pin
- VGA HDDB 15 pin
- USB Type B receptacle
Console Port Connectors (All Female Types):- Local Console: PS/2 Keyboard Mini Din 6 pin
- PS/2 Mouse Mini Din 6 pin
- VGA HDDB 15pin
Remote Console:- Serial Port (DB9 pin Male)
- LAN port (RJ-45 8P8C)
(10BASE-T Ethernet uses Category 3/4/5/5E/6 UTP while 100BASE-T Ethernet uses Category 5/5E/6 UTP)
Features- Provides BIOS level access and SSL encryption
- Provides Keyboard and Mouse Emulation
- VGA Resolution: Local: 1600 X1200 Remote: 1280 X1024
- Metal housing provides a durable solution
- Operation Temperature: 0~50°C
- Storage Temperature: -20~60°C
- Humidity 0~80%, Non-Condensing
|
|
|
|
|
|
|
|
|
